Product News: Sioux Chief PEX Chair Slab Organizer for Multi-Floor Installations

Product News: Sioux Chief PEX Chair Slab Organizer for Multi-Floor Installations
Sioux Chief PEX Chair slab organizer

Interested in Sewer/Drain Cleaning?

Get Sewer/Drain Cleaning articles, news and videos right in your inbox! Sign up now.

Sewer/Drain Cleaning + Get Alerts

The PEX Chair slab organizer from Sioux Chief Mfg. Co. is designed to support single 3/8-inch through 3/4-inch PEX supplies on residential or commercial, multi-floor construction projects. The organizers can be connected in parallel or offset configurations using an interlocking tongue and groove. The raised midsection allows concrete to flow through and around the device. The rear contour is made to abut vent pipes. Other features include rebar receiver for ground staking and height adjustment for precast deck over pours. 800/821-3944; www.siouxchief.com.

Aluma flatbed utility trailer   

The 7712H single-axle flatbed utility trailer from Aluma Trailer features 14-inch aluminum wheels and extruded aluminum floor with front and rear retaining rails. The bed is 77.5 inches wide and 142 inches long. LED lighting package and safety chains are included. 866/415-3285; www.alumaklm.com.

Uponor pre-insulated PEX pipe  

Pre-insulated PEX pipe from Uponor North America is available in thicknesses up to 2 inches with 1 and 1.5 inches of insulation to comply with the ASHRAE 90.1-2013 Energy Code and the 2012 International Energy Conservation Code (IECC). The pipe is available in 50-, 75- or 100-foot coil lengths. Pre-insulated Wirsbo hePEX pipe also is available for hydronic heating and cooling applications in 1/2- through 2-inch pipe sizes with 1/2, 1, 1 1/2 and 2 inches of insulation. 800/321-4739; www.uponor-usa.com.

Water Cannon pressure washer/jetter   

The 17HJ39 pressure washer/jetter package from Water Cannon has a Honda GX 630 electric-start engine with battery and 15-gallon long-run fuel tank. Roll-cage protected, it features V-belt drive, General HP Series triplex plunger pump (5.5 gpm, 3,500 psi), jetter/pulse valve on demand, 350-foot, 3/8-inch capacity hose reel, ball valve, hose, wand and four nozzles. 800/333-9274; www.watercannon.com.

Caleffi thermostatic mixing valves   

The 521 Series of adjustable thermostatic mixing valves from Caleffi Hydronic Solutions feature Presscon fittings, designed for fast, easy installation and maintenance. Available in 3/4-inch press connections, the low-lead valves are cUPC listed to ASSE 1017/CSA B125.3 for point-of-distribution in domestic water system and radiant hydronic heating systems. 414/238-2360; www.caleffi.com.

Moen low-profile divide stainless steel sinks   

The 1800 Series of low-profile divide stainless steel sinks from Moen feature a lower center divide between the sink bowls, making it easier to rinse large items and swivel pot handles. Made from 18-gauge stainless steel, the sinks are available in double-equal or double-offset platforms with a wear-resistant finish and SoundSHIELD undercoating for noise reduction. 800/289-6636; www.moen.com.

HammerHead selective-point repair system  

The RS MaxPatch trenchless, selective-point repair system from HammerHead Trenchless Equipment, a Charles Machine Works Company, is designed for circular or oval sewer and stormwater pipes 3 to 48 inches in diameter, including concrete, reinforced concrete, vitrified clay, PVC and asbestos cement. The composite consists of a glass-reinforced fabric and two-part ambient-cure resin mixture that exceeds the structural requirements of ASTM F1216. The resin is odor free, styrene free and VOC free. 800/331-6653; www.hammerheadtrenchless.com.

MetroTel noise-suppression receiver   

The Cable Hound receiver with digital signal processing (DSP) noise suppression from MetroTel Corp. is designed to filter out most unwanted noise while locating irrigation control wires and valves, buried cable, gas and water pipes, tracer wires and tapes. The kit contains a transmitter, digital receiver, headphones, tone probe, ground rod and carrying case. 402/426-3789; www.metrotelcorp.com.

Crescent quick-convert nut driver set   

The quick-convert nut driver set from Crescent Tools, part of the Apex Tool Group, provides the speed of a straight handle driver with the torque of a T-handle driver in one tool. The set includes seven color-coded drivers for easy identification. The universal socket design fits six fastener types (hex, square, 12-point and E-Torx, partially rounded hex and spline) in both SAE and metric sizes. 919/362-1670; www.crescenttool.com.

Send us your plumbing product news. Send new product news and photos/videos to Plumber.



Discussion

Comments on this site are submitted by users and are not endorsed by nor do they reflect the views or opinions of COLE Publishing, Inc. Comments are moderated before being posted.