The Model D-5 from Electric Eel is a continuous cable drum machine for cleaning 3- to 10-inch lines up to 100 feet. The high-density polyethylene drum and belt guard will not rust or dent and holds up to 100 feet of 3/4-inch Tri-Max cable. Three sealed, heavy-duty ball bearings support the drum and thick-wall guide tube for extended wear. It is powered by a heavy-duty, 1/2 hp, capacitor-type motor to provide more torque. It has large, 10-inch solid wheels for easy maneuvering and stabilization while in operation. It has 1 1/4-inch steel tubing framework, five-position height adjustments on the handle, a wheel brake, continuous belt skids and a loading wheel built into the handle, GFCI on a 20-foot line cord and an air-operated foot switch for easy operation. 800-833-1212; www.electriceel.com
Gorlitz Sewer & Drain Model GO 68HD
The Model GO 68HD heavy-duty electric drain cleaning machine from Gorlitz Sewer & Drain is available in two different versions, either with an open steel reel or enclosed polyethylene drum, and it can be outfitted with an optional power feeder. Standard configuration is 150 feet of 11/16-inch hollow-core cable, which should reach most blockages with a single reel. Overall weight of this machine is 185 pounds. Adding a loading ramp and electric winch to any vehicle makes transportation quick and simple. It is designed to clean pipes from 3 to 8 inches in diameter. 877-446-7548;
www.gorlitz.com
Milwaukee Tool M18
Drum Machine
With the ability to tackle tough clogs such as grease, scale and buildup, Milwaukee Tool’s M18 Drum Machine for 3/8- to 1/2-inch cables allows users to clear drains confidently with instant setup, all-day runtime and easier transportation. The drum machine delivers up to 40% more torque at max capacity in 1 1/2- to 4-inch drainlines and can clear up to 100 feet with 3/8-inch cable and up to 75 feet with 1/2-inch cable. With cordless convenience, users can power their machine anywhere without the hassles and trip hazards of extension cords, and can complete a full day of work on a single battery charge when paired with an M18 REDLITHIUM XC4.0 battery. The lightweight design features an enclosed drum that provides protection against the mess during transportation on and off the job, and an inner drum helps to prevent cable bind-ups. 800-729-3878; www.milwaukeetool.com
RIDGID FlexShaft Drain Cleaning Machine accessories are designed to provide wall-to-wall cleaning in 1 1/4- to 6-inch residential and commercial pipes in conjunction with any FlexShaft model. Accessories include a variety of chain knockers and brushes designed to quickly clean pipe. Chain knockers come in standard, carbide-tipped or penetrating head versions that expand to the size of the pipe, clearing the entire pipe circumference of grease, sludge, small tree roots and soft blockages with less mess and enhanced speed. Nylon and nylon/steel brushes deliver final pipe cleaning and relining preparation. FlexShaft machines allow for inspection cameras to remain in-pipe throughout the entire drain cleaning process for maximum efficiency. 800-474-3443; www.ridgid.com
Spartan Tool Model 1065
The Model 1065 is Spartan Tool’s original professional-grade cable machine. It offers a 250-foot range to clean pipe from 3 to 10 inches in diameter. The Dial-A-Cable power feed allows for quick cable changes and feeds cable in and out easily, while the blockage-sensing smart motor senses the need for more power when encountering a difficult blockage. A fully enclosed drum helps keep customer’s living areas clean, and the unit has a rugged design for tough jobs, according to the maker. 800-435-3866; www.spartantool.com
Hose Reels
COXREELS 1125 Series
The 1125 Series from COXREELS is now available with two upgraded swivel options. The medium-pressure (up to 4,000 psi) and high-pressure (up to 5,000 psi) can be factory installed on the standard 1125 Series. The medium-pressure swivel is precision-machined from solid brass and features upgraded wall thickness and upgraded seals and backup rings. The high-pressure swivel is machined from high-strength steel and nickel plated for corrosion resistance. This ball bearing swivel features maximum flow and enhanced load-bearing capabilities. 800-269-7335; www.coxreels.com
Hannay Reels 6200
Power Rewind Reel
The 6200 Power Rewind Reel from Hannay Reels is designed to stand up to rigorous waterjetting and blasting applications. With heavy-duty steel construction, strong spool, sturdy frame and hydraulic motor, the reel offers hose expansion control for I.D. hose widths between 3/4- and 1-inch. Up to 500 feet of hose is supported at 3,000 psi, making it suitable for large jobs. The A-assembly roller on the front of the frame allows for proper storage and easy dispensing on truck or trailer mounts. Optional upgrades include 5,000 psi working pressure, roller assembly, direct drive hydraulic motor rewind and a hose package, allowing for a wide range of customizations to suit needs. 518-797-3791; www.hannay.com
Grease Chemicals
Oatey Hercules Wham Drain
and Waste System Cleaner
Hercules Wham Drain and Waste System Cleaner from Oatey is a powerful, concentrated, multi-use, chemical emulsifier that liquifies and disperses grease, soap, detergents and other organic waste responsible for system failure. The biodegradable formula is nonacid/noncaustic and an environmentally safe, biodegradable cleaner that dissolves, deodorizes and controls buildup. It is safe to use in metal or PVC plastic piping. It makes cabling a drainline easier and cleans greasy solids from tools and many types of hard surfaces. The floral-scented drain cleaner can be used regularly as a preventive treatment to keep drainlines, septic tanks, grease traps and waste systems at maximum efficiency.
800-321-9532; www.oatey.com
Nozzle
Enz USA 37 mm Bulldog
The 37 mm Bulldog from Enz USA has been redesigned for low flow jetter units. Operating as low as 5.5 gpm, this nozzle can aggressively remove tree roots, grease and hard deposits. It’s suitable for accessing mainline blockages from a 2-inch toilet roof vent and wall clean-out. The small size allows it to easily maneuver pipe bends. An integrated oil-free braking system results in a low wear and tear operation, resulting in low upkeep and virtually maintenance-free operation. This nozzle can be used with both fresh and recycled water. Flow rates start at a range from 5.5 gpm, depending on the output of the jetter unit. It is available in 3/8- and 1/2-inch connecting threads. The cleaning pipe diameter range starts from 1.5- to 6-inch pipe. 877-369-8721; www.enz.com
Portable Jetters
General Pipe Cleaners JM-2900 Jet-Set
The JM-2900 Jet-Set gas-powered water jet from General Pipe Cleaners can quickly clear grease, sand and ice in 4- to 8-inch drainlines. It is designed to be light and maneuverable, and it is driven by a 13 hp Honda engine connected directly to a 3,000 psi, 4 gpm triplex pump. Vibra-Pulse helps the hose slide around tight bends in small lines and down long runs. A 200-foot-capacity hose reel with reel brake is mounted on a heavy-duty frame with two 10-inch flat-free foam-core tires. It has a thermal relief valve to protect the pump from heat damage, along with a backflow check valve and inlet filter. An optional spray wand is available. 800-245-6200; www.drainbrain.com
MyTana M30
MyTana’s M30 provides the power and range to clean 1.5- to 6-inch lines without sacrificing maneuverability. It has a removable hose reel which, combined with the 50-foot jumper hose and reel stand, allows indoor jetting while the 390cc Honda motor remains outside. The industrial triplex pump delivers 4.5 gpm at 3,000 psi and has thermal protection and pulsation control. Attach a rotating nozzle and take on most any blockage. The engine has electric start (EZ start bypass), automatic throttle down and auto choke to help the motor run efficiently. The reel carries 200 feet of 3/8-inch jetter hose, while 75 feet of 1/8-inch hose is available for smaller lines. All components are thoughtfully packaged on a rugged cart with balanced weight. It is easy to load, maneuver, maintain and use. 800-328-8170; www.mytana.com
The 1776 Dolly Jetter Heavy Duty Edition from Patriot Sewer Equipment & Repair was designed to be very compact and easy to load and unload from a work vehicle. Equipped with a Briggs & Stratton 23 hp V-Twin engine, it weighs in at 350 pounds and generates 3,500 psi at 11 gpm. Standard features include 300 feet of 3/8-inch red Piranha jetter hose, remote start and stop for a one-man operation, a portable 100-gallon water tank with auto fill valve that allows the worker to have the volume of water needed to clean 4- to 6-inch pipelines with ease, flat-free tires that are made of solid polyurethane foam, and an hour and battery gauge that helps keep track of the health of the battery and also helps keep up with the maintenance of the dolly jetter. 888-318-9888; www.patriot.us
Root Control Chemicals
RootX
RootX comes in 2- and 4-pound containers. A 2-pound container is designed to treat 50 feet of 4-inch sewer line and a 4-pound container is designed to treat 100 feet of 4-inch or 75 feet of 6-inch sewer line. With the funnel/applicator it is easy to apply. Simply attach the funnel and cap to the top of the jar, and shake back and forth for approximately 1 minute. Remove the cap and pour it into the toilet or cleanout and immediately follow it with the appropriate amount of water for the application. Restrict water usage for a minimum of 4 hours. Annual treatments are recommended. Septic tanks can also be treated simply by using 8 pounds per a 1,000-gallon tank. Pump the liquid down just low enough to expose the roots. Apply the RootX to the root infested area and add water to activate the foam. 800-844-4974; www.rootx.com
Root Cutters
Arthur Products
Cnt-r-KUT G2 EMAX2
The Cnt-r-KUT G2 EMAX2 from Arthur Products is an interchangeable cutter nozzle to clear roots and debris. The centering devices can be modified for custom applications. They help operators tackle tough jobs, including when using drain cleaning nozzles in tight spaces in damaged sewers, and technicians can expect to achieve maximum cleaning spread in drains and other pipes. 800-322-0510; www.arthurproducts.com
Root Rat cutting nozzle
Root Rat cutting nozzles are used with jetters from 11 hp to large truck-mounted models. The cutters are made of hardened stainless steel and come with a toolbox with two interchangeable rotors — one with cables and the other with chains. The combination kit includes extra chain, cable and bearings. They need no repair or rebuilding other than bearing replacement, which can be completed in less than two minutes for under $10 in parts. 800-288-7873; www.rootrat.net
USB-USA Turbo 0
One of the smallest chain cutters offered by USB-USA, the Turbo 0 utilizes turbine technology and 3D fluid mechanics to deliver cutting and cleaning power. Multiple chain attachments and rigid guide skids from 4 to 6 inches make the removal of roots, grease and mineral deposits easier. This cutter is constructed from hardened stainless steel, comes standard with one-piece ceramic nozzle inserts and is capable of use with recycled water. 844-285-5770; www.usb-usa.com
Truck/Trailer Jetters
American Jetter
51T Series 2650
The 51T Series 2650 trailer jet from American Jetter offers 26 gpm at 5,000 psi. Dual Kohler electronic fuel-injection gasoline engines provide consistent power and create 114 hp, saving up to 20% fuel, while avoiding problems associated with carburetor engines. Low water shut-off prevents pump damage if the optional 600- to 800-gallon tanks run low. The main reel holds up to 500 feet of 1/2-inch hose, and speed control allows for precise cleaning in both directions. A long-range wireless remote option allows for water ON/OFF, engine shutdown and hose reel control. The heavy-duty square-tubing trailer offers standard electric brakes on both axles. 866-944-3569; www.americanjetter.com
Cam Spray 3012H Compact
Skid Mount Jetter
The 3012H Compact Skid Mount Jetter from Cam Spray is designed to go into a high cube van or pickup bed and take up as little space as possible while still flowing 12 gpm at 3,000 psi. Features include a Honda iGX 800 fuel-injected gasoline engine with oil alert and hour meter, powering a gearbox-driven plunger pump with ceramic plungers, stainless steel valves, pressure gauge and 80-mesh water filter. The pump is protected by an unloader valve and secondary pop-off. A power pulse feature is used for navigating longer runs and elbows. The 100-gallon tank includes low water shut-off and a float valve to manage filling the tank. An industrial coated skid platform and frame offers transferability between vans, trucks and trailers, while mounting flanges and D-rings allow for the machine to be fastened or tied down. The machine measures 52 inches long by 41.5 inches wide by 50 inches tall. 800-648-5011; www.camspray.com
HotJet USA HotJet II
The HotJet USA HotJet II trailer-mounted jetter is available with hydraulic hose reels and a 37 hp Vanguard fuel-injected engine. Operating with hot or cold water, it runs at 12 gpm at 4,000 psi, cleaning 2- to 12-inch lines, making it an alternative between small-output and larger-output machines. It arrives turnkey with a 330-gallon water tank, detergent tanks and full power-washing capabilities for cleaning, disinfecting and sanitizing after the job. It includes a hydraulic hose reel, heavy-duty 7,000-pound-rated tandem axle trailer (single axle also available), rear control panel with a remote control, two heavy-duty diamond-plate side toolboxes and one front toolbox. 800-624-8186; www.hotjetusa.com
Jetters Northwest Eagle-200 4010
Trailer Jetter
The Eagle-200 4010 Trailer Jetter from Jetters Northwest offers 10 gpm and 4,000 psi performance. It is an uprated version of the previous 4009 model and is powered by a Kawasaki 31 hp fuel-injected/liquid-cooled engine in a hooded enclosure. The trailer is industrial-duty with brakes for safety and a beefy A-frame tongue allowing it to be towed when full of water. Flat-top-fenders allow for additional mounting surface and standard aluminum wheels give a sharp appearance. It comes with a super-duty triplex UDOR USA pump, 400-foot jetting hose on a 12-volt powered hose reel with adjustable reel speed, 200-gallon water tank, large 60-inch lockable tool storage bin, 100 feet of 3/4-inch water-supply hose on a second reel, adjustable pulsation control and four jetting nozzles. A wireless remote control is included on “DWR” models. More upgrades and nozzles are available. 877-901-1936; www.jettersnorthwest.com
