ALARMS

FloLogic

The FloLogic alarm offers smart leak detection and an automatic shut-off system with industrial-grade U.S.-made cast bronze valves in sizes up to 2-inches. It has comprehensive real-time leak detection, detecting leaks as small as a half-ounce per minute from the moment they start. When a leak is detected, the water is shut off automatically and the users receive an alert through the FloLogic smartphone app. The FloLogic CONNECT module also features a thermometer, allowing low room temperature alerts and automatic water shut-offs. All systems are equipped with battery backup for continued protection during outages. Plumbers who sell and install FloLogic can help their clients secure their home against plumbing supply leak damage. 877-356-5644; www.flologic.com

CONTROLS

SJE Rhombus Model 32S

The Model 32S control panel from SJE Rhombus is designed to alternately control 2 three-phase pumps in industrial and commercial water and sewage systems using the robust DPC-4F Pump Control Four Float Controller for pump sequence, alternation, selection, lag pump delay time and alarm. If a high water alarm condition occurs, the high water alarm float activates the audible/visual alarm system along with auxiliary contacts for remote alarm. Common applications include lift stations and pump chambers. Models are available with intrinsically safe relay for circuit extension into hazardous locations. It is UL/cUL Listed. 888-342-5753; www.sjerhombus.com

Zoeller Pumps Pivot Pro+ Reversing panels

Designed to work with Zoeller Pumps reversing grinder pumps, Pivot Pro+ Reversing panels contain all the built-in diagnostics, supervision, and features that customers have come to expect from the Pivot product line. The Reversing panels contain new technology that goes further than simply reversing pump direction cycle to cycle. They will also reverse or switch pumps (duplex only) mid-cycle according to timers in a user settable menu. This helps prevent clogs and pump jamming before they become detrimental pump health issues. These features can be monitored, configured and set up for notifications for free using the Z Control online device platform. Panels and pumps are available in 1Ph (with capacitor start kits) and 3Ph with a wide selection of amp ranges. 800-928-7867; www.zoellerpumps.com

FITTINGS

REHAU EVERLOC+ copper press adapters

REHAU EVERLOC+ copper press adapters allow for efficient transitions between different piping materials in potable and nonpotable commercial applications. Available in 1/2- to 2-inch sizes, the adapters are designed to provide quick yet secure transitions from copper to RAUPEX PEXa pipe. As an extension of the REHAU EVERLOC+ product line, the adapters feature the same compression-sleeve technology and joining technique. The system uses a textured PEXa compression sleeve that delivers an extreme grip and immediate seal. Each PEX connection further contains multiple sealing edges, a signature feature of the system that provides enhanced security. Connections are made using a consistent, two-step expansion and compression process with battery-powered compression-sleeve tools. Completed connections are immediately secure and ready for pressure testing regardless of pipe diameter and weather conditions, streamlining commercial installations while reinforcing system reliability. 800-247-9445; www.everlocplus.com

SharkBite PEX-a pipe and expansion fitting system 

The SharkBite PEX-a pipe and expansion fitting system combines highly engineered materials with robust testing standards to provide a system that’s quick to install and built to last. It allows for longer pipe runs and fewer fittings needed for a job, reducing installation time and potential leak points. Because it expands, it is less susceptible to burst in freezing conditions compared to rigid pipe. It has a high chlorine resistance and UV rating. The brand’s range of expansion fittings, which come in dezincification-resistant brass or engineered polymer, comply with NSF 14 and are designed to resist corrosion. 877-700-4242; www.sharkbite.com

Vista Water Group VIAgap

VIAgap from Vista Water Group is a certified plumbing water fitting designed to prevent backsiphonage while receiving a single drainline from various types of appliances and devices, including reverse osmosis systems, water softeners, whole house water filters, medical devices, condensate lines and overflow lines. Available in multiple sizes and constructed with an integrated straightening vein that virtually eliminates splashing, all models are certified to meet ASME A112.1.3 and IAPMO PS 65 air gap standards, as well as NSF 61 and 372 materials standards. Designed to accommodate multiple installation options, models feature integrated barb fittings on both inlets and outlets, and can be installed with included wall-mountable clips or directly into a standpipe or full inline pipe mount with couplings. For similar applications that require air gaps for multiple drainlines, the DrainGap Multi-Port Drain Adapter with Air Gap is also available. 419-565-5702; www.vistawatergroup.com

FIXTURES

CORRO-PROTEC Powered Anode Rod 

CORRO-PROTEC Powered Anode Rods made of titanium stop corrosion, rotten egg smell and limescale buildup inside hot water tanks. Designed to last over 20 years, they are a long-term solution that don’t require any maintenance. The power supply, plugged on top of the titanium anode rod, provides small electrical current that completely stops corrosion. With that unlimited source of protection, it can double the life of the tank and prevent unwanted reactions like the sulfur smell in hot water, limescale buildup inside the water heater and air in water pipes. Since the anodes won’t deteriorate over time, they are 12 inches long and easy to install in a wide range of water heaters starting from 10 gallons to 120 gallons, including a specific model for Bradford White tanks. They fit on electric, gas, solar, hybrid, indirect and geothermal water heaters. 877-466-6660; www.corroprotec.com

in2aqua PS Techno S shower system

The in2aqua PS Techno S shower system is ergonomic and sustainable without losing comfort. Its super slim slide bar will give any shower bathroom a minimalistic and timeless touch. With a 60-degree angle, it ensures full body coverage for an enhanced shower experience. Compatible with any in2aqua CALGreen or max 2.5 gpm shower head and head spray, it offers plug-and-play functionality. The systems are multifunction models, offering the choice of hand shower spray technologies. The powerful massage spray can exhilarate the body, and the Swirl technology with uncloggable spiraling hollow spray treats the skin in a circular motion. Other hand spray technologies include the rejuvenating Silk spray, as well as Airdrop, which operates quietly and saves water at the same time. 800-257-6051; www.in2aqua.com

Facilities Resource Group TTS Synergy Series

The TTS Synergy Series from Facilities Resource Group offers high-performance tankless rack systems in a wide range of configurations, with one point of connection for water, power, gas, venting and a condensate drain. Its compact footprint and pre-manifold system present a worry-free installation, resulting in increased efficiency, cost and time savings. 877-554-0004; www.webfrg.com

Mikrofill 3

The Mikrofill 3 is an advanced, “direct-type” pressurization unit available for sealed, low-pressure hot-water and chilled-water commercial and multifamily residential applications. Able to fill any heating or chilled water system from empty without using a pump, the product also delivers commercial backflow protection with no RPZ valves, while also providing comprehensive electronic pressure management. It has been tested and approved in accordance with ASSE LEC 2009-2021. 312-761-5826; www.mikrofill.us

Uponor AquaPort

The Uponor AquaPort is a self-contained unit that converts a building’s hydronic heating supply to on-demand domestic hot water. This solution eliminates centralized domestic hot water and recirculation piping to provide numerous benefits, including energy and water savings, improved water quality, installation efficiencies, and reduced maintenance. 800-321-4739; www.uponor-usa.com

HYDRANT

PRIER C-634

PRIER’s C-634 commercial wall hydrant has a high flow rate at 16 gpm at 25 psi differential carrying the ASSE 1052 approval, which includes an integral vacuum breaker and backflow preventer. It allows water to drain even when the hose is attached, making servicing easy and a must for cold climates. Box options include round, satin nickel, brass and aluminum, all of which install flat to the building surface and enhance the look of any building. Each box comes with a gasket to ensure back spray doesn’t leak into the building. The hydrant ensures a reliable water supply, installs easy, allows more flow, and hugs the wall for a clean, powerful and dependable hydrant solution. 800-362-9055; www.prier.com

PIPE/CASING/TUBING

Fisher Mfg. gas hoses

Gas hoses from Fisher Mfg. are designed to meet the demands of commercial kitchens, ensuring safety, reliability and ease of use. They have a PVC-coated, nonflammable construction with a stainless steel braid for added durability. With 360-degree rotational ends, installation becomes flexible while providing maximum protection to the hose. Each gas hose kit includes essential components such as a quick disconnect, restraining cable, full port valve and an elbow. With a range of hose lengths and diameters available, they are suited for any foodservice operation. 800-421-6162; www.fisherfaucets.com

Flow-Liner Systems Neofit+Plus Expandable Pressure Pipe

Neofit+Plus Expandable Pressure Pipe from Flow-Liner Systems is a trenchless technology that creates an impenetrable barrier between drinking water and the existing host pipe. Host pipes (like lead and copper) can leach dangerous levels of toxic materials in your drinking water. The Neofit+Plus EPP structural material has been scientifically proven by examining extensive hydrolysis testing, indicating it will last well over 100 years. It often only requires a single small access pit, saving yards, trees, sidewalks and floors from demolition. The speedy process allows for many installations a day and immediate return to service. 800-348-0020; www.flow-liner.com

PUMPS

A.Y. McDonald E-Series DuraMAC Water Pressure Booster System

A.Y. McDonald’s E-Series DuraMAC Water Pressure Booster System comes complete with easy setup instructions, all metal connections, a half-gallon pressure tank, and check valve. In addition, users experience a quiet operation due to the TEFC single-phase motor. Designed to shut off when no flow is detected, this solution gives an extra boost to water pressure. 800-292-2737; www.aymcdonald.com

Liberty Pumps ProVore 

The ProVore grinder from Liberty Pumps is designed for use in applications where addition of a bathroom or other fixtures below sewer lines requires pumping. It has the same V-Slice cutter technology used in the Omnivore Series. Powered by a 1 hp motor, this smaller grinder is designed to operate on a standard 115- or 230-volt circuit, requiring only a 20-amp breaker. No special wiring is needed. The pump comes with a 2-inch vertical-style discharge and a standard leg pattern matching the LE Series. This allows for easy retrofit into existing systems. Compact factory-assembled systems are available in simplex and duplex versions: the ProVore 380 and ProVore 680. 800-543-2550; www.libertypumps.com

SAFETY/PERSONAL PROTECTION EQUIPMENT

Thunderbolt Locks Alarm Padlock

The Alarm Padlock from Thunderbolt Locks has a built-in sensor that can detect movement to activate a 110 dB alarm siren to ward off thieves. It is manufactured with a heavy-duty, corrosion-resistant body and a thick stainless steel shackle for increased security. The padlock is weatherproof, has a dual high collar body to fend off bolt cutter access, includes three high-security keys and can be used in silent mode. The alarm resets automatically and includes two sets of batteries. A warning label is applied to the lock body to warn potential thieves there is a siren alarm built into the lock, and a break-in attempt is not advised. This lock is suitable for securing box trucks, trailers, toolboxes, fences, construction equipment and any other application that requires a padlock. 765-652-6587; www.thunderboltlocks.com

TOOLS

Dallas Specialty Internal Pipe Cutter

The Internal Pipe Cutter from Dallas Specialty features a free spinning shaft, and its blade attaches easily to the chuck, quickly adjusting using the convenient twist/set handle. Simply release the twist/set handle and slide the guide collar over the shaft gauge to the correct depth, tighten the twist/set handle, insert into the pipe and cut. The blade spins freely. It can be used to cut pipe sizes 1 1/2 to 6 inches, with an adjustable cutting depth 1 to 6 inches. A safety collar prevents the blade and shaft from falling down the pipe. It is ideal for tight spaces, and for cutting pipes against walls and below concrete surfaces. Its handle gives stability and control to the cutter. 800-222-5644; www.dallasspecialty.com

Milwaukee Tool M18 FORCE LOGIC Long Throw Press Tool

Milwaukee Tool’s M18 FORCE LOGIC Long Throw Press Tool has an in-line design that offers access for navigating around installed pipes, while also delivering a high level of press accuracy and reliability. Powered by the M18 REDLITHIUM Battery, the tool is part of the only press tool system where users can cut, fasten and connect on one battery platform. It utilizes REDLINK Intelligence, which features auto-cycle and pre-press battery checks to prevent partial presses. Indicated by a green LED light on the tool, it visually alerts users when a press cycle is completed, and when calibration is needed. The press tool operates at 50,000 cycles before calibration is needed. This delivers a long calibration interval, keeping the tool on the job to maximize users’ return on investment. 800-729-3878; www.milwaukeetool.com

VALVES

Aquaguard WAGS Valve

WAGS Valves from Aquaguard can stop a leaking water heater tank from continuously refilling and dripping, or until the tank fails catastrophically. The shut-off valve halts the incoming water supply, and on gas-fired units, shuts off the gas supply to ensure the home’s safety from water heater failure. They are mechanically operated; meaning no maintenance, no electricity or no battery checks are required. They sit in a drip pan under the water heater and are activated when leaking water accumulates to a predetermined level in the pan. Once activated, the industrial-duty, one-shot safety valve shuts off the water and gas supply if so equipped. A red tab pops out to indicate valve activation. 844-438-9247; www.wagsvalve.com

Bradley Navigator digital mixing valve

Bradley’s Navigator digital mixing valve delivers precise temperature control and programmable features. Engineered with technology to deliver and maintain water temperatures within +/- 3 degrees F, even during low and zero demand periods, the digital valve maximizes safety and efficiency for domestic hot water systems. The valve’s intuitive controller allows proactive temperature control by setting the temperature for normal operation and scheduling periodic thermal disinfection cycles. Data logging and BMS integration allow for convenient remote monitoring to ensure the proper water temperature is being distributed, eliminating the risk of elevated temperatures and scalding. Its automatic daily ball rotation feature removes scale to keep the valve running smoothly while reducing cleaning and maintenance time. The valve’s programmable weekly thermal disinfection system — with four programmable settings — raises temperatures to kill Legionella and other harmful bacteria. After disinfection, the system will automatically flush hot water and reset for daily use. 800-272-3539; www.bradleycorp.com

Jomar Valve Lead Free Brass CPVC Insert Ball Valve

Lead Free Brass CPVC Insert Ball Valves from Jomar Valve have a standard CTS connection, and are full port, two-piece, 150 WOG valves featuring a durable brass body, quarter-turn operation, CPVC end connection inserts and an optional drain tap 1/8-inch orifice. Made for hot and cold water systems, the valves are 100% leak tested and available in 1/2- to 1-inch sizes. 586-268-1220; www.jomarvalve.com

WATER HEATERS

Bradford White Water Heaters ElectriFLEX MD

Bradford White Water Heaters’ ElectriFLEX MD medium-duty commercial tank-type electric water heaters are available in 50-, 80- and 119-gallon capacities to fit a variety of applications. With available advanced features such as Incoloy low-watt density elements, field conversion kits to fit demanding application needs, Vitraglas lining with Microban antimicrobial product protection, and a Hydrojet sediment reduction system, they are designed to deliver reliable high performance in any conditions. 800-523-2931; www.bradfordwhite.com

Heat-flo Extra High Output

The Heat-flo Extra High Output (XHO) indirect series of tanks are available in 85- and 115-gallon capacities. The entire tank including the 100 feet of coil, body and dip tube are all made of 316L stainless steel. All the piping connections are easily accessible and make for an efficient, cost-effective installation. The finished tank is jacketed with a dent- and rust-resistant HDPE plastic and is highly insulated to minimize standby heat loss. Applications requiring high volumes of domestic hot water but are limited to a small tank footprint are ideal. These tanks excel when utilized in apartment buildings, dormitories and nursing homes. 508-278-2400; www.heat-flo.com

Intellihot Electron

The Electron tankless heat pump water heater from Intellihot provides the energy efficiency, water safety and on-demand performance of tankless water heaters. It uses electric heat pump technology with carbon dioxide as the refrigerant paired with a specially designed thermal battery. Carbon dioxide is environmentally friendly, with a low Global Warming Potential of 1; it has superior heat transfer characteristics compared to synthetic refrigerants; it’s a naturally occurring substance and abundant in the atmosphere; and it’s safe because it’s nonflammable and nontoxic. The specially designed thermal battery stores heat energy and enables heating water on demand. Models include the iE1, an integrated unit with a thermal battery that can be installed indoors or outdoors; and the iE6, a larger unit that installs outdoors and pairs with the iB3, an indoor thermal battery. 866-692-6791; www.intellihot.com

Rheem ProTerra Hybrid Electric Heat Pump Water Heater

Rheem’s ProTerra Hybrid Electric Heat Pump Water Heater is available in a variety of sizes (40, 50, 65, and 80 gallon) with the same footprint as a standard electric water heater, making it an ideal replacement solution. With zero-clearance requirements and front-facing components, the unit easily fits into small spaces and improves serviceability. Built-in EcoNet Wi-Fi technology provides advanced diagnostics. Hybrid electric heat pumps offer immediate energy savings and are eligible for federal tax credits and local utility incentives. 866-339-2388; www.rheem.com