With the Singular Combi Boiler from Bosch Thermotechnology, one system satisfies heating hot water needs. Featuring 95% annual fuel utilization efficiency, it provides efficient, dependable home heating and up to 7.7 gpm of domestic hot water production. This system is compact and weighs under 80 pounds for easy installation. Depending on inlet water temperature, the 4000 model can run between two and three showers and the 5200 model can run three showers plus a dishwasher. Features like an exhaust gas outlet sensor and a standard inlet filter screen to keep out debris provide extra protection for the boiler. 800-283-3787; www.bosch.us
Bradford White Water Heaters Brute FT Floor Standing Combination Boiler
The Bradford White Water Heaters Brute FT Floor Standing Combination Boiler is a residential combi boiler that simultaneously provides domestic space and water heating thanks to a design that doesn’t require a diverter valve. Boasting a 10-1 turndown and an ultra-high 95% AFUE condensing efficiency, it is an environmentally friendly solution that saves users both energy and fuel. The top-mounted piping connections make the unit an easy efficiency upgrade for almost any application, even replacing older cast iron systems. It can deliver 6 gpm of hot water in the first minute and 5.2 gpm continuous delivery at a 70°F temperature rise. It includes a stainless steel fire-tube heat exchanger; electronic PID modulating control; a large, intuitive user interface; and a built-in low loss header.
800-523-2931; www.bradfordwhite.com
Controls
SJE Rhombus Select Start Starter Boxes
Select Start Starter Boxes from SJE Rhombus provide a reliable means of controlling one 208 VAC three-phase motor, one 240 VAC three-phase motor, one 480 VAC three-phase motor, or one 575 VAC three-phase motor in water, wastewater, and sewage installations. They utilize a wide-angle float switch to activate a combination motor controller to turn the motor on and off in auto mode, and have an adjustable overload that allows for easy adjustment of motor overload current. Common applications include pump chambers, sump pump basins, irrigation systems, lift stations and air compressor systems. They are UL/cUL listed. 888-342-5753; www.sjerhombus.com
Fittings
BrassCraft Tankless Water Heater Installation Kits
BrassCraft Tankless Water Heater Installation Kits connect most tankless water heaters to gas and water supplies. Connectors are made of corrugated stainless steel that is compatible with copper pipe. They are approved for indoor and outdoor use, with a temperature rating of 40 to 180 degrees F. The service valve pressure rating is 125 psi maximum/gas connector 1/2 psi maximum. The gas connector is 100% leak tested. 877-272-7755; www.brasscraft.com
CORRO-PROTEC Powered Anode Rod
CORRO-PROTEC Powered Anode Rods made of titanium stop corrosion, rotten egg smell and limescale buildup inside hot water tanks. Designed to last over 20 years, they are a long-term solution that don’t require any maintenance. The power supply, plugged on top of the titanium anode rod, provides small electrical current that completely stops corrosion. With that unlimited source of protection, it can double the life of the tank and prevent unwanted reactions like the sulfur smell in hot water, limescale buildup inside the water heater and air in water pipes. Since the anodes won’t deteriorate over time, they are 12 inches long and easy to install in a wide range of water heaters starting from 10 gallons to 120 gallons, including a specific model for Bradford White tanks. They fit on electric, gas, solar, hybrid, indirect and geothermal water heaters. 877-466-6660; www.corroprotec.com
Supply Smart Brass
PEX Fittings
Supply Smart offers a variety of Brass PEX Fittings in a choice of brands and sizes. Whether you’re a Crimp PEX or Expansion PEX plumber, you are covered. The fittings provide strong connections that are anti-corrosive, resulting in long-lasting, quality work. With the ability to withstand extreme temperatures, they are a popular choice among plumbers. 860-631-7793; www.supplysmart.com
Vista Water Group DrainDock Multi-Port Drain Adapter
Frequently used for consolidating appliance drain lines and HVAC condensate lines in both residential and commercial equipment rooms, the DrainDock Multi-Port Drain Adapter from Vista Water Group accepts multiple drain connections in one small hub – saving space, cost and time. It is certified to meet ASME A112.18.2 for plumbing waste fittings, and its 1/2-inch FNPT injection-molded ports accept up to eight drain connections in one small fitting. Made from noncorrosive Schedule 40 PVC, all models are highly resistant to corrosion and scale buildup, are 100% free from lead and toxic chemicals, and meet NSF 61 and NSF 372 standards. Simple to install vertically almost anywhere needed, it includes top and bottom hubs that easily accept standard-sized pipe, adapters or couplings. 480-462-2707; www.vistawatergroup.com
Hydronic Heating
ADEY Quick Test
Water Strip Pots
Testing the quality of hydronic system water is the first and foremost step of preventing corrosion from occurring in any hydronic systems. It is essential to understand what contaminants are in the system water, including new system water. New system water may look clear but doesn’t necessarily mean that it is. ADEY Quick Test Water Strip Pots provide an on-site opportunity to assess, diagnose, and restore or treat any new or existing system through the use of filtration and water treatment. The quick test strips provide rapid on-site analysis of critical water quality issues, which allows for any new or existing hydronic system to be treated or restored. With immediate and accurate results, there is no waiting around for third party outcomes. 412-979-7653;
international.adey.com/us
Valves/Hydrants
Aquaguard WAGS Valve
WAGS Valves from Aquaguard can stop a leaking water heater tank from continuously refilling and dripping, or until the tank fails catastrophically. The shut-off valve halts the incoming water supply, and on gas-fired units, shuts off the gas supply to ensure the home’s safety from water heater failure. They are mechanically operated; meaning no maintenance, no electricity or no battery checks are required. They sit in a drip pan under the water heater and are activated when leaking water accumulates to a predetermined level in the pan. Once activated, the industrial-duty, one-shot safety valve shuts off the water and gas supply if so equipped. A red tab pops out to indicate valve activation. 844-438-9247; www.wagsvalve.com
Flomatic Valves 4082S6 ball check valve
The AIS-compliant Model 4082S6 ball check valve from Flomatic Valves is now available in a full 316 stainless steel 8-inch design. A proven favorite in the wastewater industry for decades, it is designed according to AWWA C508 standard lay lengths. It incorporates a self-cleaning nitrile (Buna-N) covered metal ball featuring no sharp edges or snag points — helping to prevent clogging from nondegradable sanitary products. There are no moving parts except for the Buna-N vulcanized metal ball which moves out of the flow path, resulting in reduced headloss. 800-833-2040; www.flomatic.com
The P-628 Narrow Wall Commercial Hydrant from PRIER Products is built for interior walls and ideal for stadiums, public restrooms, indoor pools and other large recreational areas. It offers both hot and cold valves for temperature mixing. It comes with a lockable, stainless steel box that makes both vertical and horizontal installation easy (four different orientations). No special installation tools are required. It fits inside a standard 4-inch wall and includes full-sized handles that are also removable if a vandal-proof loose key operation is desired. It is field tested as required by ASSE 1052, pressure rated to 125 psi, temperature rated to 140 degrees, and has a high flow rate of 9 gpm at 25 psi differential. It is also approved by ASSE to NSF 372 (lead-free). 800-362-9055; www.prier.com
REHAU PRO-BALANCE 1 1/4-inch stainless steel manifolds regulate fluid flow in radiant heating/cooling and snow and ice melting systems. They support system control by allowing for a visual check on flow rates and the ability to adjust circuits. The pre-assembled manifolds paired with 5/8 and 3/4-inch RAUPEX O2 barrier pipe are especially suitable for commercial snow and ice melting projects, such as healthcare campuses and town centers. Whether surfaces must be cleared for an emergency medicine helipad or a ski resort retail plaza, snow and ice melting systems are intended to contribute to the safety of pedestrians and drivers. Snow and ice melting systems additionally offer quiet, automated convenience without the need for traditional snow removal methods involving plow trucks or chemicals that can lead to property damage. 800-247-9445; www.na.rehau.com
Viega’s ProPress Automatic Recirculation Balancing Valve ensures balanced domestic water recirculation by changing with varying conditions. It keeps water temperatures more uniform by adjusting flow with changes in temperature. The results are faster hot water delivery, minimized waste energy and water and less stagnation and chance of contamination. Temperature can be set once and be maintained automatically. Settings can be changed easily, if needed. It can be installed on risers or branches. Remote monitoring is possible with a temperature sensor. An optional thermometer provides visual indication of valve setting. Threaded ends allow use with ProPress or PureFlow fittings systems. It includes a bypass for thermal disinfection. 800-976-9819; www.viega.us
