BOILERS

Dunkirk AT Series Electric Boiler

The AT Series Electric Boiler from Dunkirk offers a compact wall mount design that weighs just 70 pounds. It is a high efficiency green alternative with no combustion and zero emissions. Two- and four-element models are available offering outputs from 20,500 up to 82,000 Btu/h. Its advanced microprocessor control means elements energize individually with additional elements energizing as needed to meet demand. The startup element is rotated to balance run time across all elements for longevity. A sensor connected to a probe in an immersion well determines demand to efficiently maintain steady, even heat using only the elements needed. It has built-in brown out protection and safety monitoring. The boiler also utilizes an auto reset fuse on the control board as well as a replaceable fuse for the low voltage wiring. It includes an operating limit with back-up high limit protection. 315-797-1310; www.dunkirk.com

Lochinvar LECTRUS Electric Boiler

The Lochinvar LECTRUS Electric Boiler is a versatile product ideal for almost any application requiring sustainable alternatives to natural gas or propane models, including health care, education and government facilities. The unit is available in a kilowatt range from 15 to 150 kW and can be installed indoors without losing performance — even in below-freezing ambient conditions. Up to eight units of varying sizes can be cascaded to create a system that best suits an application’s needs. The boiler can also be installed alongside other condensing and noncondensing Lochinvar boilers to optimize performance and reduce carbon emissions. SMART SYSTEM LCD operating control allows for modulation and staging of the elements to operate within the full kW range of the boiler. 615-889-8900; www.lochinvar.com

Rinnai America RCB-Series Boiler

The RCB-Series Boiler from Rinnai America is a compact building heat source that delivers reliable, energy-saving performance. With 97% thermal efficiency and a 10-1 turndown ratio, the commercial-grade, wall-hung condensing boiler offers precise load tracking. Available in 301,000 and 399,000 Btu/h models, the unit provides both heat and can connect to a tank for domestic hot water production. It makes it easy to program, access, and monitor boiler performance onsite with the intuitive 7-inch LCD touchscreen for simple set up and maintenance. And with integrated cascade logic, up to eight boilers can be combined on one system to distribute runtimes equally for optimal application diversity. It was designed to be lightweight — 170 to 183 pounds — with an easy-hang wall mount bracket. The design also simplifies service with 270 degrees of access through three removable panels. 800-621-9419; www.rinnai.us

CONTROLS

SJE Rhombus EZ Series In-Site CL

The EZ Series In-Site CL data logging control panel from SJE Rhombus offers wireless Bluetooth connection for smart devices. There is no need to open the panel for configuration, viewing status or downloading data using the EZ Connect Mobile App. The Bluetooth smart module eliminates the need for a PC to enable safe and secure access in all weather conditions. The panel utilizes the C-Level sensor for continuous level monitoring and records up to 4,000 system events, including pump run times, pump cycles, alarm conditions, HOA settings, power outages and service calls. The In-Site software formulates system data for you, creating reports quickly and easily so system conditions can be identified and corrected. Single-phase simplex or duplex models are available. The panel can be easily converted to demand or timed dose in the field. 888-342-5753; www.sjerhombus.com

COUPLINGS

Viega MegaPress 1/2- to 2-inch Zero Lead Bronze Transition Coupling

The Viega MegaPress 1/2- to 2-inch Zero Lead Bronze Transition Coupling is designed to join dissimilar piping systems with a galvanic-compatible material that reduces the risk of corrosion. The transition coupling uses press end technology, eliminating the need for threading or welding. It is made of ZL bronze and features Smart Connect technology, which allows users to easily identify unpressed fittings. The IPS to CTS is a transition coupling that will allow users to transition dissimilar piping systems (IPS to CTS, and IPS-CTS-PEX) with a material that can reduce the risk of corrosion. It is made of ZL bronze and has an EPDM sealing element, Smart Connect, as well as NSF 61 approval. The IPS to IPS offers two models, one with an EPDM sealing element and one with a FKM sealing element, and allows users to join dissimilar piping systems with a material that can reduce the risk of corrosion. This is for joining carbon steel to stainless steel or galvanized steel to stainless steel. 800-976-9819; www.viega.us

FITTINGS

Matco-Norca copper press fittings 

Matco-Norca copper press fittings are designed to deliver superior performance, ease of installation and long-lasting reliability, according to the maker. The fittings are a popular, alternative method to traditional metal piping systems, for joining copper tubes and fittings. Engineered to meet the rigorous demands of modern plumbing systems, the fittings offer a secure, leakproof connection without the need for soldering, threading or flaring. The versatile fittings are suitable for a wide range of plumbing applications, including potable water, heating and cooling systems. 800-431-2082; www.matco-norca.com

FIXTURES

CORRO-PROTEC Powered Anode Rod 

CORRO-PROTEC Powered Anode Rods made of titanium stop corrosion, rotten egg smell and limescale buildup inside hot water tanks. Designed to last over 20 years, they are a long-term solution that don’t require any maintenance. The power supply, plugged on top of the titanium anode rod, provides small electrical current that completely stops corrosion. With that unlimited source of protection, it can double the life of the tank and prevent unwanted reactions like the sulfur smell in hot water, limescale buildup inside the water heater and air in water pipes. Since the anodes won’t deteriorate over time, they are 12 inches long and easy to install in a wide range of water heaters starting from 10 gallons to 120 gallons, including a specific model for Bradford White tanks. They fit on electric, gas, solar, hybrid, indirect and geothermal water heaters. 877-466-6660; www.corroprotec.com

HYDRANTS

PRIER Products P-623 and P-628

P-623 and P-628 narrow-wall boxed hydrants from PRIER Products are built for interior wall construction and nonfreezing/mild climate applications. They are lead-free and ideal for healthcare facilities, restaurants, retail stores, schools, institutions, garages, stadiums, swimming pools and other large recreational areas. The P-623 is a single temperature design while the P-628 features both hot and cold inlets for tempered water. Both valves come with a lockable stainless steel box, offer a variety of installation options, and have integral shutoffs for simple future maintenance. The box can be mounted so that the inlets can be directed vertically or horizontally. The door/frame can also be oriented to open in any direction (up, down, left, or right). Everything fits inside a standard 4-inch wall. 800-362-9055; www.prier.com

PIPE/CASING/TUBING

IPEX Drain-Guard DWV

Drain-Guard DWV from IPEX is a comprehensive double-containment drainage system that enhances safety and reliability in drain, waste and vent applications. From industrial plants to pharmaceutical facilities, it ensures secure sanitary or storm drainage transport in critical environments. Featuring corrosion-resistant materials and molded DWV double containment drainage pattern fittings, it is durable and easy to install. The Centra-Lok design minimizes joints, reducing the risk of failures and leaks while lowering installation and maintenance costs. The primary fitting securely locks into the secondary fitting, allowing for simultaneous solvent cement joining for added efficiency. Available in sizes ranging from 1 1/2 by 4 inches to 12 by 16 inches (with larger sizes available upon request), it provides the reliability and performance necessary for demanding DWV applications. 800-463-9572; www.ipexna.com

Uponor PP-RCT Piping

Uponor PP-RCT Piping a the lightweight, durable solution available in sizes from 1/2 to to 12 inches. It is 80% lighter than steel, uses heat fusion for joining to eliminate open flame, and resists corrosion, rust and scale buildup for greater durability. 888-594-7726; www.uponor.com

PIPE SUPPORTS

Oatey Pipe Supports 

Oatey offers multiple solutions for pipe support. Whether you’re securing to or supporting a wall, ceiling or floor, designed clamps, brackets and hooks are available to complete the supply line, DWV and heating applications. In addition, products to protect piping systems once installed are also available. Popular products include the Metal Hanger Strap that offers a quick and inexpensive way to hang pipe from joists or rafters. The DWV J-Hook provides a fast, easy, economical way to secure drain piping. Insulating Pipe Clamps are designed to eliminate pipe notching and wrapping when running water lines through framing. 800-321-9532; www.oatey.com

PUMPS

Milwaukee Tool M18 Brushless Single Acting 60in3 Hydraulic Pump

The M18 Brushless Single Acting 60in3 Hydraulic Pump from Milwaukee Tool eliminates manual pumping, delivering up to 2.5 times faster application speeds. By eliminating the need to manually pump, this solution vastly reduces fatigue, with up to 95% less muscle effort versus hand pumps, delivering increased productivity and faster applications. The single-acting pump features 60 cubic inches of usable oil to fully extend a wide variety of small tools and cylinders to full stroke. The single-acting hydraulic pump is designed to be fully compatible with all existing 10,000 psi single-acting rated hydraulic hoses and cylinders. A manual valve allows precise control over return flow, while a bladder window allows you to quickly gauge fluid levels. At 12.6 pounds, this compact pump is highly portable. A trigger lockout helps prevent unwanted tool activation in transport, setup and teardown. 800-729-3878; www.milwaukeetool.com

Zoeller M53 Mighty-Mate

The Zoeller M53 Mighty-Mate is a sump pump designed for reliability and durability. Equipped with a powerful 1/3 hp motor, it delivers dependable performance in varied applications. Its robust construction features an epoxy-coated cast iron switch case, motor and pump housing, allowing optimal heat dissipation to ensure long-lasting use and resistance to corrosion. It is capable of handling solids up to 1/2 inch in diameter, making it suitable for removing groundwater or effluent. With a nonclogging vortex impeller and automatic float-activated switch, it offers hassle-free operation and protection against flooding. The 53-0001 model includes a contractor-preferred lighted LED plug that lights up when plugged in, indicating the pump is receiving power, simplifying troubleshooting without removing the pump. 800-928-7867; www.zoellerpumps.com

SAFETY/PERSONAL PROTECTION EQUIPMENT

RefrigiWear HiVis Insulated Softshell Jacket

The HiVis Insulated Softshell Jacket from RefrigiWear offers safety, durability and comfort. With over 400g of insulating power and a flexible, water-repellent polyester shell, this jacket keeps the user warm and dry. Its silver twill heat-reflective lining reflects body heat back to keep the user warmer, while multiple zipper pockets provide storage. Featuring a full-zip collar, inner waist drawcord, and adjustable cuffs, it seals out drafts for comfort. It meets ANSI/ISEA 107-2020 - Type R, Class 2 standards. Jackets are available in black/lime and black/orange colorways. 800-645-3744; www.refrigiwear.com

TANKS

A.Y. McDonald Pressure Tanks

Potable pressure tanks provide on-demand pressure water storage. This “reserve” reduces waterhammer effects and reduces pump cycles; therefore, increasing the life of your pump. A.Y. McDonald pressure tanks feature high-quality polypropylene internal linings for longevity and corrosion resistance. The epoxy-based polyurethane external coating ensures maximum UV protection and a clean crisp look. Durable butyl membranes provide years of trouble-free service. Designed for versatility, they are rated to a max pressure of 150 psi and a max temperature of 194 degrees F. Tanks come precharged to 40 psi but are easily adjustable in the field, and the integrated stainless steel connections make installation easy. 800-292-2737; www.aymcdonald.com

TOOLS

Dallas Specialty DS-AIPC-2000 Cutter

The DS-AIPC-2000 Cutter adjustable internal pipe cutter from Dallas Specialty has a free-spinning shaft and blade that attaches easily to the chuck, and is quickly adjustable using the convenient twist/set handle. Simply release the twist/set handle and slide the guide collar over the shaft gauge to the correct depth, tighten the twist/set handle, insert into the pipe and cut. The blade spins freely. It cuts pipe sizes 1 1/2 through 6 inches, and has an adjustable cutting depth of 1 to 6 inches. A safety collar prevents the blade and shaft from falling down the pipe. It is ideal for tight spaces and for cutting pipes against walls and below concrete surfaces. Its handle provides stability and control. 800-222-5644; www.dallasspecialty.com

VALVES

Aquaguard WAGS Valve

WAGS Valves from Aquaguard can stop a leaking water heater tank from continuously refilling and dripping, or until the tank fails catastrophically. The shut-off valve halts the incoming water supply, and on gas-fired units, shuts off the gas supply to ensure the home’s safety from water heater failure. They are mechanically operated; meaning no maintenance, no electricity or no battery checks are required. They sit in a drip pan under the water heater and are activated when leaking water accumulates to a predetermined level in the pan. Once activated, the industrial-duty, one-shot safety valve shuts off the water and gas supply if so equipped. A red tab pops out to indicate valve activation. 844-438-9247; www.wagsvalve.com

WATER HEATERS

A. O. Smith Emerge X Air Source Heat Pump Water Heater 

A. O. Smith’s Emerge X Air Source Heat Pump Water Heater optimizes heat transfer and minimizes emissions, making it both environmentally friendly and cost-effective. The unit utilizes a low GWP refrigerant (R513A) to help meet sustainability goals and adhere to local regulations. Its modular design allows for flexible installation options, and its user-friendly control panel makes it simple to adjust settings and monitor performance. Up to 64 units can be banked together to ensure ample hot water supply, built-in redundancy and capacity matching for larger commercial water heater demands. The unit’s variable-speed electronically commutated motor operates in tandem with the flow control valve to provide tighter control of the unit, decrease the noise level and promote higher efficiency. It operates at high efficiency in below-freezing temperatures thanks to its reversing defrost cycle. 800-527-1953; www.hotwater.com

Bradford White Infiniti GS and GR

Infiniti GS and GR tankless water heaters from Bradford White Water Heaters include a temperature setting up to 185 degrees F, a cascade operation with a combination of standard (GS) and recirculation (GR) models, common venting with PVC or polypropylene, an optional commercial rack system, and easy plumbing kits. They are designed to provide contractors with reduced installation time and material costs. They are certified by the Green Restaurant Association, the leading voice within the Green Restaurant movement, for use in GRA-certified restaurants. They meet the latest Energy Star requirements and qualify for most utility rebate programs. 800-523-2931; www.bradfordwhite.com

Heat-flo Extra High Output

The Heat-flo Extra High Output (XHO) indirect series of tanks are available in 85- and 115-gallon capacities. The entire tank including the 100 feet of coil, body and dip tube are all made of 316L stainless steel. All the piping connections are easily accessible and make for an efficient, cost-effective installation. The finished tank is jacketed with a dent- and rust-resistant HDPE plastic and is highly insulated to minimize standby heat loss. Applications requiring high volumes of domestic hot water, but are limited to a small tank footprint are ideal. These tanks excel when utilized in apartment buildings, dormitories and nursing homes. 508-278-2400; www.heat-flo.com

Intellihot Neuron Series

Every Intellihot water heater is designed for quick and easy installation, yet the Neuron Series was specifically designed as a simple drop-in ready replacement to tank-type units. Engineered with hookups in the same location as the old-school tank-type heaters they replace, the units reduce or eliminate the need to repipe. A data-driven sizing calculator identifies the size water heater needed — and it’s guaranteed correct or additional equipment is provided at no cost. The water heaters provide the safety and convenience of tankless units while reducing CapEx and OpEx, and reducing the space required in a utility room. 866-692-6791; www.intellihot.com

Noritz Hybrid Hot Series

The Noritz Hybrid Hot Series combines the benefits of a storage tank and a tankless water heater in one powerful unit for commercial applications requiring a large dump load of hot water over a short period. Designed for faster hot water recovery, this gas-fired unit ensures continuous, reliable hot water delivery by pairing a corrosion-resistant, cement-lined 119-gallon storage tank with a Noritz NCC199CDV commercial condensing tankless water heater. It offers standard or direct venting with cost-saving 2-inch PVC, CPVC or polypropylene materials and common-venting of up to six tankless units. 714-433-2905; www.noritz.com

Rheem Triton Super Duty

The Triton Super Duty water heater from Rheem boasts a 119-gallon capacity and 500,000 Btu per unit, designed to meet the needs of commercial businesses with the greatest demand for hot water. Premium models feature built-in LeakGuard, an intelligent leak detection and prevention system with an auto-shutoff valve that limits leakage to no more than 24 ounces. Additionally, it includes the Condensate Neutralizer, which reduces water acidity and ensures safe drainage at no extra cost. The Energy Star-rated unit utilizes EcoNet smart monitoring technology, offering advanced diagnostics, maintenance alerts, energy and water usage reports, and scheduling capabilities. This makes it a cost-effective choice for heating water during peak operating hours. 800-621-5622; www.rheem.com

Stiebel Eltron C Series

Specially engineered for industry, light to heavy, or commercial applications, C Series three-phase tankless water heaters from Stiebel Eltron meet the temperature rise and flow needs of nearly any factory, distillery, laboratory or gym. The product range includes both hot-start and cold-start general application models; plus models designed for safety and caustic fluid applications. They are available from 12 to 144 kW in all common three-phase voltages with output temperatures ranging from 60 to 180 degrees F. Heat exchangers are made from 2-inch square, high-grade 316L stainless steel. The large heating channel is part of the reason they have a remarkable low pressure drop, even at 40 gpm flow. Output temperatures are controlled to a temperature variance of ±1.5 degrees F. 800-582-8423; www.stiebel-eltron-usa.com