Boilers

Bradford White Water Heaters Brute FT

Bradford White Water Heaters Brute FT wall-hung and floor-standing boilers and combination boilers deliver reliable performance and efficiency with a stainless steel, fire tube heat exchanger and shell-in-tube design. Featuring 95% or more AFUE efficiency, modulating gas valves with up to 10-1 turndown and outputs from 80,000 to 199,000 Btu, these boilers provide energy savings and flexibility. They include sealed combustion, premix ceramic fiber burners and low NOx emissions (17 ppm) that exceed stringent air quality standards. Models support natural gas or propane, offer multiple venting options (horizontal/vertical, CPVC or polypropylene), and include built-in features like a condensate trap, leak detection and an on-board three-speed pump for noise reduction and fine-tuned performance. Units meet ASME Section IV construction requirements with the H-stamp for 30 psi maximum working pressure. 215-641-9400; www.bradfordwhite.com

Heat-Flo Extra High Output

The Heat-Flo Extra High Output indirect series of tanks are available in 85- and 115-gallon capacities. The entire tank including the 100 feet of coil, body and dip tube are all made of 316L stainless steel. All the piping connections are easily accessible and make for an efficient, cost-effective installation. The finished tank is jacketed with a dent- and rust-resistant HDPE plastic and is highly insulated to minimize standby heat loss. Applications requiring high volumes of domestic hot water, but are limited to a small tank footprint are ideal. These tanks excel when utilized in apartment buildings, dormitories and nursing homes. 508-278-2400; www.heat-flo.com

Navien NAZ

Navien NAZ series heat pumps are equipped with inverter‑driven compressors and capacity‑matching technology that adapts dynamically to current load conditions, ensuring comfort while lowering operating costs. NAZ delivers reliable heating with outdoor temps as low as -4 degrees F and operates quietly thanks to sound‑dampening features. A contractor‑centric design makes it easy to install and service. Bluetooth-enabled diagnostics via the Navien MultiKit app help streamline setup, charging and troubleshooting. Field-selectable defrost options, precharged for lines sets up to 25 feet, and four access panels further enhance flexibility and speed on site. It can be paired with the NPF hydro‑furnace and NAM-cased coils for dual-fuel applications. NAM coils deliver durable, AHRI‑matched performance in 2- to 5-ton capacities, with multi-position flexibility and leak‑tested reliability. When integrated with the gas‑fired, 97% AFUE NPF hydro‑furnace, the system offers year‑round optimization with either heat pump operation or gas furnace. 800-519-8794; www.navieninc.com

Noritz NRCR Pro

The Noritz NRCR Pro series integrates state-of-the-art recirculation technology into a high-efficiency tankless water heater for faster hot-water delivery at the tap and shower. Less waiting means greater comfort, convenience and less water waste. The built-in, fully integrated recirculation pump delivers hot water instantly and supports up to 500 feet of pipe. Constructed with two stainless steel heat exchangers, it resists corrosion and thermal stress, extending the water heater’s lifespan. Bluetooth connectivity empowers users to schedule, monitor and control temperature. With a 0.98 UEF rating, the NRCR Pro delivers efficient, endless hot water with advanced recirculation. 714-422-8120; www.noritz.com

Rinnai RCB SERIES

The Rinnai RCB SERIES boiler offers a complete line of condensing, gas-fired wall-hung and floor-standing hydronic boilers that act as a primary or secondary building heat source in any size commercial application. They can support systems up to 1 million Btu/h and offer up to 98% thermal efficiency. The product line also features a 7-inch LCD touchscreen that puts total control at your fingertips. Wall-hung models are lightweight at 165 (301 model) or 208 pounds (399 model) with an Easy-Hang Wall Mount bracket that speeds installation. Floor-standing models roll onto the site with casters and fit through standard doorways. 800-621-9419; www.rinnai.us

Controls

AquaMotion Combi-Guard

The AquaMotion Combi-Guard control lets the homeowner set the "ON" and "OFF" times tailored to the size of his water heating system. Use the AquaMotion Comfort Control app and access Control Combi-Guard from any mobile device, including tablets and smartphones. These “ON/OFF” times determine how quickly the recirculation pump runs to deliver hot water to every fixture (ON), as well as how long the recirculation system sits dormant (OFF). Once these settings are selected, the homeowner then sets the desired time interval(s) when he or she wishes to have instant hot water via the app. This app is used to program AquaMotion Hot Water Recirculation kits for maximum water, energy savings and comfort. The smart controller plugs into a grounded wall socket, then is paired with the app. The pump cord plugs into the controller. The WATCHDOG Smart Controller AMK-SC is compatible with Android and Apple iOS mobile devices. This product requires 2.4 GHz Wi-Fi connection. 401-785-3000; www.aquamotionhvac.com

Grundfos Demand Driven Distribution

Grundfos Demand Driven Distribution optimizes booster performance to match required pressure needs, using battery-driven data loggers positioned at critical points within the network. This system ensures an efficient water supply and maintains stable network pressure through self-learning pressure control, which adjusts it to appropriate levels, thereby minimizing undue stress that can lead to leaks and bursts. It focuses on maintaining optimal pressure throughout the network rather than solely at the booster station outlet, enhancing overall system efficiency. 913-227-3400; www.grundfos.com/us 

Fittings

BrassCraft Hot Water Heater Connectors

Stainless steel braided BrassCraft Hot Water Heater Connectors bring the flexibility needed for installations in tight spaces. Available in 18- and 24-inch lengths with a variety of connection types, they feature a reinforced PVC inner hose to combat corrosive elements such as chlorine and chloramines. With no soldering or cutting required, plumbers can save time on installations. 877-272-7755; www.brasscraft.com

Matco-Norca copper press fittings 

Matco-Norca copper press fittings are designed to deliver superior performance, ease of installation and long-lasting reliability, according to the maker. The fittings are a popular, alternative method to traditional metal piping systems, for joining copper tubes and fittings. Engineered to meet the rigorous demands of modern plumbing systems, the fittings offer a secure, leakproof connection without the need for soldering, threading or flaring. The versatile fittings are suitable for a wide range of plumbing applications including potable water, heating and cooling systems. 800-431-2082; www.matco-norca.com

NIBCO Webstone G-Series 

A new compact design is available on all Webstone G-Series fittings from NIBCO, in sizes 1/2 to 1 inch. The new models are nearly half the length of the originals, using less raw material, resulting in lower costs. They also include an improved snug-fit gasket that stays in place during installation. Included in the launch is a new lead-free 48-piece G-Series contractor kit. It features an assortment of valves and fittings in sizes ranging from 1/2 to 1 inch and end connections in press, push, PEX, MIP and FIP. The contractor kit saves on trips to the supply house and contains everything needed to get started with G-Series. 800-234-0227; www.nibco.com

Viega Heating and Cooling Solutions

Viega Heating and Cooling Solutions are engineered to reduce energy consumption by at least 30%. Unlike traditional forced air systems, the hydronic radiant fitting systems provide more consistent comfort by controlling floor and wall temperatures. With a full line of mixing, manifolds, sensors and controls, Viega offers solutions for nearly every application from residential retrofits to new construction and large commercial projects. The versatile manifolds meet the demands of hydronic heating, cooling and snowmelt systems. Stainless steel models such as the 16030 and 2804 include preassembled supply and return headers with shut-off and balancing valves, flowmeters and air bleeders for precise zone control and easy maintenance. For higher-capacity systems, copper valved manifolds with Type L headers deliver durable performance with ProPress or solder connections, while lightweight PureFlow Press polymer/PEX manifolds provide flexible solutions for smaller radiant floor applications. Across all models, the manifolds ensure superior zone balancing, cleaner installations and long-term reliability that improve efficiency and installer convenience. 800-976-9819; www.viega.us 

Hydronic Heating Components

Century Chemical Heat-Flow

Heat Flow from Century Chemical, a propylene glycol-based fluid, protects hydronic and floor heating systems. PROs and campgrounds can offer it as an add-on during septic servicing or in on-site stores. It requires minimal extra time or cost, while giving RV owners peace of mind that their systems are fully protected and ready for travel. 800-283-3787; www.centurychemical.com

Oatey Hercules Sludgehammer System Restorer & Noise Reducer

Hercules Sludgehammer System Restorer & Noise Reducer from Oatey provides system cleaning and reduced kettling while restoring heating system efficiency. It is suitable for all metals, including aluminum, cast iron and stainless steel. The restorer effectively removes sludge and corrosion while reducing boiler noise. It also pairs well with Hercules Sludgehammer Universal Corrosion Inhibitor as part of an annual heating system maintenance program. It helps restore efficiency to all hydronic systems. The system cleaner can be used in older boiler systems or when a new boiler is fitted into an existing system with sludge and scale buildup. The user must flush the product from the system after use. 800-321-9532; www.oatey.com 

Pipe (PVC, Copper, Polyethylene, PEX)

IPEX System 1738 PVC 

The IPEX System 1738 PVC product line is a flue gas venting plumbing and mechanical solution certified to the stringent UL 1738 standard, a development for gas-fired water heaters, furnaces and boilers. Engineered with precision, this plumbing and mechanical solution comprises pipes, fittings, termination kits and cement crafted to exact performance standards, ensuring safety and reliability. With a maximum flue gas temperature rating of 149 degrees F, it meets the requirements of UL 1738 for gas-burning appliances, categories I and IV. The PVC venting system resists UV degradation with clear markings indicating material type, application and temperature rating for easy identification and installation. Featuring durable solvent welding joints and UL GREENGUARD Gold-certified cement and primers, the system ensures long-lasting performance and ease of installation. 289-881-0120; www.ipexna.com

Uponor ChlorFIT 

Engineered for commercial domestic water and low-temperature hydronics, Uponor ChlorFIT delivers durability and reliability, providing cost and labor efficiencies while enhancing sustainability in all commercial projects. Available in sizes from 1/2 to 8 inches and custom orders up to 24 inches, it offers a comprehensive range of products, including pipe, fittings, valves and ProPEX transitions for seamless integration with Uponor PEX-a pipe. Ideal for multifamily, hospitality and education buildings, it is ideally suited for new construction, renovation and retrofit projects. The system supports both hot and cold potable water distribution, as well as low-temperature hydronic piping. When paired with Uponor AquaPEX, it creates a complete, hybrid solution. 800-321-4739; www.uponor.com

Pumps

SFA Saniflo Sanicondens Best Flat

The SFA Saniflo Sanicondens Best Flat condensate pump offers a compact look, a larger volume and the ability to handle multiple mechanical systems. It uses a built-in neutralizer to boost the pH of the acidic condensate before it can be discharged into a drainline — thus preventing corrosion. Its streamlined design incorporates two 1-inch inlets: on the side and the other on the top near the neutralizer tray. Its built-in tank has a capacity of 0.9 gallons, or nearly a half-gallon more than the 0.55-gallon tank of its predecessor. This larger volume maintains longer contact between the condensate and the neutralizing pellets, allowing the unit to handle fixtures with higher Btu inputs. The pumping unit can be floor or wall-mounted. It comes ready to install with connections to an external overflow, shut-off switch or alarm system. It also includes all necessary hardware for ease of installation: 20 feet of vinyl tubing, inlet adapter, discharge adapter and neutralizing granules. 800-571-8191; www.saniflo.com

Taco Comfort Solutions TridentBoost

TridentBoost from Taco Comfort Solutions is a booster system engineered to deliver versatility, performance and ease of use in commercial and industrial water applications. A user-friendly interface provides real-time system insights, diagnostics and multi-level secure access, putting complete control in the operator’s hands. The gasket-free design streamlines installation, reduces maintenance and eliminates common sealing issues, offering greater flexibility in the field. Compatible with both end-suction and vertical multistage pumps, it allows for seamless integration across diverse applications, giving system designers unmatched freedom. 401-942-8000; www.tacocomfort.com

Thermostat

Bosch Connected Control BCC110 Thermostat

The Bosch Connected Control BCC110 Thermostat is an Energy Star-rated Wi-Fi-enabled solution designed to help homeowners save energy and money while maintaining comfort. Compatible with most 24-volt AC heating and cooling systems including gas, oil, electric, forced air and heat pumps, it supports up to 2 Heat/2 Cool for conventional and 4 Heat/2 Cool for heat pump configurations. It requires a C-wire and offers multiple control options: a 5-inch full-color touchscreen display, the Bosch EasyAir app or voice commands via Amazon Alexa or Google Assistant. Users can easily adjust temperature settings, set schedules and activate vacation mode all remotely. With Wi-Fi connectivity, the thermostat provides local weather data and helps determine optimal indoor temperature throughout the day. Additional features include an HVAC filter reminder for system maintenance and intuitive programming for up to four customizable schedules, ensuring year-round comfort and convenience. 800-283-3787; www.bosch-homecomfort.us

Valves

A.Y. McDonald Pressure Reducing Valves

In order to maintain a set pressure in the structure or reduce the high incoming water pressure, a Pressure Reducing Valve is often installed. A.Y. McDonald’s valves are designed to provide consistent, reliable water pressure while protecting plumbing systems from excess force. Built with high-quality materials and precision engineering, these valves reduce incoming water pressure to a safe, manageable level, extending the life of fixtures and appliances. Easy to install and service, they are engineered for long-term performance and efficiency. Available in a range of sizes and configurations, they are ideal for both residential and commercial applications. 800-292-2737; www.aymcdonald.com

Aquaguard WAGS Valve

WAGS Valves from Aquaguard can stop a leaking water heater tank from continuously refilling and dripping or until the tank fails catastrophically. The shut-off valve halts the incoming water supply and, on gas-fired units, shuts off the gas supply to ensure the home’s safety from water heater failure. They are mechanically operated; meaning no maintenance, no electricity or no battery checks are required. They sit in a drip pan under the water heater and are activated when leaking water accumulates to a predetermined level in the pan. Once activated, the industrial-duty, one-shot safety valve shuts off the water and gas supply if so equipped. A red tab pops out to indicate valve activation. 844-438-9247; www.wagsvalve.com

Flomatic Valves Flo-Trol Flow Regulators

Flomatic’s NSF/ANSI 61 certified Flo-Trol flow regulators deliver dependable, uninterrupted flow control across a wide range of plumbing and water system applications. Available in sizes from 3/8 to 3 inches, these stainless steel valves offer flow ranges from 0.19 to 120 gpm. Each is laser engraved for easy identification and individually packaged for added protection. Designed for consistent performance and reliability, the valves are ideal for ground water and well pumps, irrigation and sprinkler systems, water purifiers, filters, softeners, tankless water heaters, cooling towers, fan coils, eye wash stations, drinking fountains, dispensing machines, filling equipment and even car wash systems. 518-761-9797; www.flomatic.com

PRIER P-118 TrueTemp

The PRIER P-118 TrueTemp is an outdoor faucet that provides a year-round source of hot and cold water in areas that are subject to freezing temperatures. With a single-handle temperature and water flow control, this hydrant is versatile. The ergonomic, rubber grip handle controls the flow of water, while the temperature is controlled by the inset dial on the handle. It is offered in a satin nickel-plated finish or an oil-rubbed bronze body, both maintaining an attractive aesthetic. Each valve is air-tested at the factory to provide a leak-free quality product. It is a simple installation process that includes a mounting bracket to help secure the valve on the outside wall. PRIER also offers the P-114, a matching single temp hydrant. 800-362-9055; www.prier.com