The Power of Re-Piping with PEX

For aging buildings — or newer structures with piping-performance issues — the decision to continue repairing the existing plumbing and heating systems versus doing a total re-pipe can be daunting. Discover how three plumbing professionals found success re-piping large commercial buildings with cross-linked polyethylene.
The Power of Re-Piping with PEX
Flexible PEX enables contractors to overcome structural challenges in historical commercial renovations.

Interested in Commercial Plumbing?

Get Commercial Plumbing articles, news and videos right in your inbox! Sign up now.

Commercial Plumbing + Get Alerts

We often think of a facelift as an external beautification tool. But in the case of older buildings, it’s what we cannot see (behind the walls) that typically needs the biggest makeover.

The Arts at Broussard Crossing

Take, for example, the case of the 184-unit The Arts at Broussard Crossing apartment complex in Lafayette, Louisiana. The building’s plumbing system had leaky pipes and mold issues when the owners decided to replace the outdated, polybutylene piping with PEX, or cross-linked polyethylene — a flexible plastic piping product that is growing in popularity for commercial plumbing and hydronic piping systems for both new and re-pipe applications.

For the extensive re-pipe project, which required the installation to take place while the building was occupied, the building owners hired SageWater, a Virginia-based company specializing in pipe replacements. SageWater had installed over 30 million feet of new pipe in about 80,000 apartments and condominiums over several decades, so the building owners had confidence in their abilities to deliver a finished project on schedule and on budget.

The original pipes were run through the first-floor slab of the two-story building, but the replacement pipes were installed through the first-floor ceiling.

“It’s common to use a different path from the existing pipes to avoid obstacles, such as electrical, joist and concrete barriers,” says Chris Nelson, senior project manager for SageWater. 

The installers were able to run 300-foot coils of the PEX piping in continuous lengths with no fittings, ensuring faster installation times while also reducing the opportunity for mistakes.

“It’s a balancing act to work around tenants’ essential comforts and the need to install the new pipe (cutting into ceilings and drywall for access), and then to repair and paint after the work is completed,” Nelson says. “But, we do a lot of re-pipe jobs, so we are comfortable balancing all the elements involved, so the job is done quickly, correctly, on time and within budget.”

Aloft Tulsa Downtown Hotel

Another project, the Aloft Tulsa Downtown Hotel in Tulsa, Oklahoma, involved not just re-piping, but a total renovation of the city’s former city hall. Here’s the catch: The 2013 project was a historical building.

The developer, Brickhugger LLC, wanted to keep the original marble walls and terrazzo floors, mixing them with Aloft’s signature light fixtures and ceiling designs. The structure needed a complete overhaul, including a new plumbing and hydronic piping system.

“In a redesign job, there is usually limited workspace, and this job was no exception,” says Todd Ringgold, project manager at Palmer Mechanical, the company hired to do the plumbing and hydronic piping installation. “We worked with a very tight ceiling space. The hallways were dropped only two feet, and we needed to accommodate fire sprinklers, fresh air, sanitary sewer, exhaust air, heating, cooling, domestic hot and cold water, and lighting.”

Palmer Mechanical had been involved with other historical renovations in Tulsa, such as the Mayo Hotel. As a result, Ringgold says, local engineers have built a high level of trust in Palmer’s recommendations.

“When we work directly with developers in our own design-builds, we almost exclusively specify PEX because of the savings we are able to bring to the projects,” he says. “PEX allows us to run our lines in such a way that we can avoid conflicts with other trades and keep up with our deadlines without interrupting other installers and without compromising the integrity and quality of our installation.”

According to Ringgold, PEX offers significant labor savings due to the speed of installation with the flexible piping. With rigid CPVC, the installer has to glue and wait for the joints to set up.

There is also excess material waste with CPVC, because the installer has to be careful not to mix adapters. And with copper, there is always the concern about construction-site thefts, increasing costs and installation times.

George Fox University

Aging educational facilities are also seeing benefits with PEX for re-piping. For the George Fox University dormitory renovation in Newberg, Oregon, school officials decided to prioritize energy savings by adding new piping to their outdated radiators. Hydro-Temp Mechanical of Wilsonville, Oregon, was the contracting firm chosen for the project. They worked closely with rep firm Hollabaugh Brothers and Associates to provide the best solutions to the project.

“We have a long-standing relationship with Hydro-Temp that allowed us to discuss product performance and installation parameters,” says Casey Hollabaugh, vice president of Portland-based Hollabaugh Brothers and Associates. “We brainstormed several possible solutions. But because of the complexity of the remodel, PEX piping became the only viable long-term solution.”

Specifically, the pre-existing construction (mostly concrete walls) made other alternatives (like copper) cost-prohibitive, because excessive demolition would have been required to install the rigid pipe.

Because PEX piping is flexible, installers could easily insert the piping through hole penetrations in the existing framing, eliminating the need for unnecessary teardown.

“Our goal was to reuse the old galvanized-piping penetrations,” says Daniel Jeffrey, project manager with Hydro-Temp. “However, with window upgrades and other architectural considerations, the old routing didn’t line up exactly in a straight line with the new layout of the rooms. But the flexibility of PEX allowed us to adjust the offset in the 200 existing wall penetrations.” 

Jeffrey estimates that if the crew had used rigid pipe, they would have had to offset each wall penetration (over 100 pairs) with eight 90-degree fittings. “That would have been around 800 more fittings to install,” he says.

As buildings continue to age and renovations continue to expand, it is becoming apparent to the commercial building world that PEX is the material of choice for re-pipes. Not only is it a durable, reliable and high-performing product, but it is also highly flexible — making it extremely viable in tight, constrained spaces that are typical in re-piping projects.

To learn more about PEX, visit or

About the author: Kim Bliss is the senior writer for technical communications at Uponor. She can be reached at


Comments on this site are submitted by users and are not endorsed by nor do they reflect the views or opinions of COLE Publishing, Inc. Comments are moderated before being posted.