Chain Saw Nozzle Rips Through Roots

This content is sponsored by General Pipe Cleaners. Sponsored content is authorized by the client and does not necessarily reflect the views of COLE Publishing. View our privacy policy.
Chain Saw Nozzle Rips Through Roots

The Chain Saw Nozzle from General Pipe Cleaners rips through roots and increases water jet performance. A great option for higher-flow jetters, the nozzle spins chain or wire rope at up to 10,000 rpm to grind up root stoppages in 4- to 10-inch lines. Lengths can be easily switched for different-diameter pipes.

The 3/8-inch Chain Saw Nozzle uses bicycle chain to clear 4-, 6- and 8-inch lines and is available for 4, 5.5 and 8 gpm jets. The 1/2-inch Chain Saw Nozzle uses link chain to clear 4-, 6-, 8- and 10-inch lines. It works well in combination with General's 12 gpm Typhoon trailer jet.

Chain Saw Nozzles are primarily used for high-water-flow gas jetters like General’s JM-2512 Typhoon trailer jet. With 12 gpm at 2,500 psi it blasts lines clean of grease, sediment and debris. The Typhoon blows away blockages in big lines and long runs.

The Chain Saw Nozzles have replaceable threaded inserts, so when the nozzle wears, you only have to replace the inserts, not the whole nozzle. Nozzles for other jetters with different pressure and flow rates are available.

To see the Chain Saw Nozzle in action, or to learn more about General’s full line of water jetters, visit to watch the Jet-Set video catalog. For more information, contact the Drain Brains at General Pipe Cleaners at 800-245-6200.

Visit the General Pipe Cleaners Storefront


Comments on this site are submitted by users and are not endorsed by nor do they reflect the views or opinions of COLE Publishing, Inc. Comments are moderated before being posted.