Winterizing Your Jetter

With cold temperatures on their way in, protect your jetter from seasonal changes

This content is sponsored by MyTana Manufacturing. Sponsored content is authorized by the client and does not necessarily reflect the views of COLE Publishing. View our privacy policy.
Winterizing Your Jetter

Interested in Residential Plumbing?

Get Residential Plumbing articles, news and videos right in your inbox! Sign up now.

Residential Plumbing + Get Alerts

How you care for your equipment changes throughout the year. Your equipment faces a range of weather conditions, from blazing sun to subzero temperatures. Depending on where you live, you might even see both of these extremes within a calendar year. As the Northern Hemisphere heads into autumn, it’s time to start preparing for cold-weather conditions. 

Jetters are particularly sensitive to environments under 32 degrees F because the hardware is in constant contact with water. These simple tips will help you prepare your jetter during freezing temperatures and protect your investment.

Protecting your jetter

First, you need to remove all the water from the jetter hose every time you finish a job. If left inside, the water can freeze and damage the pump system and stretch or even burst the hose. If you don’t want to come out one morning to find an iced-over jetter, there are a few ways to remove the water. Many sources suggest running 100-degree-rated RV antifreeze through your hose. Never use standard automotive antifreeze; it’s more caustic and can degrade the system. Another practical (and usually less expensive) option is to use window washer fluid. Regardless of which option you choose, always be sure you choose the right temperature rating for your area. RV antifreezes with lower temperature ratings will work, but they are thicker and may end up gumming up the hose.

Another option is to simply blow the water out of the line with compressed air. Connect a compressor or air tank to the valve on the pump head to push it out of the system.

If you run a gas-powered jetter, you’ll also need to keep the fuel tank full during cold weather, much the same as you would with a vehicle.

Storing your jetter

Storage during the winter can also be a dilemma for many plumbers and drain cleaners. Keeping your jetter protected from the elements as best you can is a vital part of extending the life of your equipment. Storing your jetter in a heated garage or other building is the best option, but a well-insulated shed with a space heater works as well. It keeps your motor, pump and hose at a safe temperature to ensure nothing freezes, rusts or breaks. 

Short-term storage is pretty simple. Keep your jetter away from cold and moisture and you should be fine. But if you know you won’t be running your jetter for more than a month, there are a few things you should do to protect the motor or engine. Gas jetters need their fuel tanks and oils (in the engine and pump) drained. Don’t forget to keep an electric jetter charged using a trickle charger, and if you’re storing long term, bring the battery indoors to keep it warm.

Using your jetter

You’ll also want to consider taking a few precautions when using your jetter. If you’re in extreme cold (below 32 degrees F) preheat the holding tank with hot water and cycle the machine. Keeping the water moving helps prevent freezing. And at the end of the day, remember to clear the water out of the system.

Keeping your equipment in top shape can feel burdensome, but damaged equipment is a danger to work with and costly to replace. It does take a little more effort, but it’s worthwhile to follow preventive measures. So spend a few extra minutes to take care of your jetter in the cold, because winter is coming.

To prepare for the cold weather, get a MyTana Antifreeze kit.

Visit the MyTana Storefront


Comments on this site are submitted by users and are not endorsed by nor do they reflect the views or opinions of COLE Publishing, Inc. Comments are moderated before being posted.